[ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Linux version 4.4.194 (sunchip@sunchip-PowerEdge-R740) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #5148 SMP Fri Dec 8 14:45:50 CST 2023 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Rockchip RK3032 Dongle [ 0.000000] cma: Reserved 4 MiB at 0x6fc00000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] free_area_init_node: node 0, pgdat c0b60ec0, node_mem_map cf9f7000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 [ 0.000000] PERCPU: Embedded 13 pages/cpu @cf9c9000 s24216 r8192 d20840 u53248 [ 0.000000] pcpu-alloc: s24216 r8192 d20840 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: storagemedia=nand androidboot.storagemedia=nand androidboot.mode=normal androidboot.slot_suffix= androidboot.serialno=c3d9b8674f4b94f6 rw rootwait console=ttyS0,115200 root=PARTUUID=614e0000-0000 rootfstype=squashfs [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 244548K/262144K available (6144K kernel code, 403K rwdata, 1912K rodata, 1024K init, 355K bss, 13500K reserved, 4096K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB) [ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB) [ 0.000000] .data : 0xc0b00000 - 0xc0b64f4c ( 404 kB) [ 0.000000] .bss : 0xc0b66000 - 0xc0bbee48 ( 356 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000013] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000039] Switching to timer-based delay loop, resolution 41ns [ 0.001770] Console: colour dummy device 80x30 [ 0.001827] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.001862] pid_max: default: 32768 minimum: 301 [ 0.002107] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002136] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.003359] CPU: Testing write buffer coherency: ok [ 0.003441] ftrace: allocating 24794 entries in 73 pages [ 0.068877] /cpus/cpu@f00 missing clock-frequency property [ 0.068919] /cpus/cpu@f01 missing clock-frequency property [ 0.068939] CPU0: update cpu_capacity 430 [ 0.068959] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.069194] Setting up static identity map for 0x60100000 - 0x60100058 [ 0.074125] CPU1: update cpu_capacity 430 [ 0.074140] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.074344] Brought up 2 CPUs [ 0.074386] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.074401] CPU: All CPU(s) started in SVC mode. [ 0.076005] devtmpfs: initialized [ 0.090880] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.091685] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.091749] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.092818] pinctrl core: initialized pinctrl subsystem [ 0.094978] NET: Registered protocol family 16 [ 0.097391] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.128704] cpuidle: using governor ladder [ 0.158755] cpuidle: using governor menu [ 0.179243] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0 [ 0.179523] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1 [ 0.179808] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2 [ 0.187040] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.187064] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.240292] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-io[0]' [ 0.241109] of_get_named_gpiod_flags: parsed 'gpio' property of node '/power-led[0]' - status (0) [ 0.242005] of_get_named_gpiod_flags: parsed 'gpio' property of node '/host-drv[0]' - status (0) [ 0.242857] of_get_named_gpiod_flags: parsed 'gpio' property of node '/usb-en[0]' - status (0) [ 0.243676] of_get_named_gpiod_flags: parsed 'gpio' property of node '/dongle-en[0]' - status (0) [ 0.244469] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vsys-regulator[0]' [ 0.245539] iommu: Adding device 10108400.vpu-service to group 0 [ 0.245676] iommu: Adding device 1010c000.hevc-service to group 1 [ 0.245831] iommu: Adding device 10118000.vop to group 2 [ 0.246372] rk_iommu 10108800.iommu: can't get aclk [ 0.246402] rk_iommu 10108800.iommu: can't get hclk [ 0.246427] rk_iommu 10108800.iommu: can't get sclk [ 0.247088] rk_iommu 1010c440.iommu: can't get aclk [ 0.247123] rk_iommu 1010c440.iommu: can't get hclk [ 0.247148] rk_iommu 1010c440.iommu: can't get sclk [ 0.247465] rk_iommu 10118300.iommu: can't get aclk [ 0.247494] rk_iommu 10118300.iommu: can't get hclk [ 0.247517] rk_iommu 10118300.iommu: can't get sclk [ 0.248503] SCSI subsystem initialized [ 0.248865] usbcore: registered new interface driver usbfs [ 0.249013] usbcore: registered new interface driver hub [ 0.249326] usbcore: registered new device driver usb [ 0.250119] of_get_named_gpiod_flags: can't parse 'usb_en_gpio' property of node '/usb_control[0]' [ 0.250152] rk3036-usb-control usb_control: invalid usb gpio-2 [ 0.250174] of_get_named_gpiod_flags: can't parse 'host_drv_gpio' property of node '/usb_control[0]' [ 0.250193] rk3036-usb-control usb_control: invalid host gpio-2 [ 0.250213] of_get_named_gpiod_flags: can't parse 'dongle_en_gpio' property of node '/usb_control[0]' [ 0.250234] rk3036-usb-control usb_control: invalid dongle gpio-2 [ 0.250255] of_get_named_gpiod_flags: can't parse 'reset_gpio' property of node '/usb_control[0]' [ 0.250275] rk3036-usb-control usb_control: invalid reset gpio-2 [ 0.250295] of_get_named_gpiod_flags: can't parse 'otg_drv_gpio' property of node '/usb_control[0]' [ 0.250315] rk3036-usb-control usb_control: invalid otg gpio-2 [ 0.250412] hello usb ctrl [ 0.253694] Advanced Linux Sound Architecture Driver Initialized. [ 0.256370] clocksource: Switched to clocksource arch_sys_counter [ 0.324421] NET: Registered protocol family 2 [ 0.325683] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.325759] TCP bind hash table entries: 2048 (order: 3, 40960 bytes) [ 0.325897] TCP: Hash tables configured (established 2048 bind 2048) [ 0.326008] UDP hash table entries: 256 (order: 1, 12288 bytes) [ 0.326071] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes) [ 0.326596] NET: Registered protocol family 1 [ 0.328149] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.351066] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.351778] exFAT: Version 1.2.9 [ 0.353178] ntfs: driver 2.1.32 [Flags: R/W DEBUG]. [ 0.353927] fuse init (API version 7.23) [ 0.357843] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.357885] io scheduler noop registered [ 0.357916] io scheduler deadline registered [ 0.358332] io scheduler cfq registered (default) [ 0.361514] rk-vcodec vpu-combo: no regulator for vcodec [ 0.362009] rk-vcodec vpu-combo: failed on clk_get clk_cabac [ 0.362146] platform 1010c000.hevc-service: probe device [ 0.362727] platform 1010c000.hevc-service: drm allocator with mmu enabled [ 0.364004] platform 10108400.vpu-service: probe device [ 0.364673] platform 10108400.vpu-service: drm allocator with mmu enabled [ 0.365868] rk-vcodec vpu-combo: could not find power_model node [ 0.365897] rk-vcodec vpu-combo: init success [ 0.370449] dma-pl330 20078000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.370485] dma-pl330 20078000.pdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-14 Num_Events-16 [ 0.372523] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled [ 0.374730] [drm] Initialized drm 1.1.0 20060810 [ 0.377336] [drm] Rockchip DRM driver version: v1.0.1 [ 0.377661] rockchip-drm display-subsystem: devfreq is not set [ 0.378403] rockchip-vop 10118000.vop: failed to get vop register byname [ 0.378470] rockchip-vop 10118000.vop: missing rockchip,grf property [ 0.378760] rockchip-drm display-subsystem: bound 10118000.vop (ops 0xc0769b28) [ 0.379519] i2c i2c-3: of_i2c: modalias failure on /hdmi@20034000/port [ 0.379557] innohdmi-rockchip 20034000.hdmi: registered Inno HDMI I2C bus driver [ 0.380339] rockchip-drm display-subsystem: bound 20034000.hdmi (ops 0xc0762320) [ 0.380371] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.380388] [drm] No driver support for vblank timestamp query. [ 0.380552] rockchip-drm display-subsystem: failed to parse display resources [ 0.380636] rockchip-drm display-subsystem: No connectors reported connected with modes [ 0.380762] [drm] Cannot find any crtc or sizes - going 1280x720 [ 0.423537] Console: switching to colour frame buffer device 160x45 [ 0.438272] rockchip-drm display-subsystem: fb0: frame buffer device [ 0.441247] usbcore: registered new interface driver udl [ 0.441795] lkdtm: No crash points registered, enable through debugfs [ 0.443216] 10180000.usb supply vusb_d not found, using dummy regulator [ 0.443363] 10180000.usb supply vusb_a not found, using dummy regulator [ 0.546195] dwc2 10180000.usb: DWC OTG Controller [ 0.546269] dwc2 10180000.usb: new USB bus registered, assigned bus number 1 [ 0.546445] dwc2 10180000.usb: irq 34, io mem 0x10180000 [ 0.546970] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.547000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.547020] usb usb1: Product: DWC OTG Controller [ 0.547043] usb usb1: Manufacturer: Linux 4.4.194 dwc2_hsotg [ 0.547062] usb usb1: SerialNumber: 10180000.usb [ 0.548713] hub 1-0:1.0: USB hub found [ 0.548831] hub 1-0:1.0: 1 port detected [ 0.550208] 101c0000.usb supply vusb_d not found, using dummy regulator [ 0.550358] 101c0000.usb supply vusb_a not found, using dummy regulator [ 0.606447] dwc2 101c0000.usb: 1 invalid for enable_dynamic_fifo parameter. Check HW configuration. [ 0.606476] dwc2 101c0000.usb: 525 invalid for host_rx_fifo_size. Check HW configuration. [ 0.666975] dwc2 101c0000.usb: DWC OTG Controller [ 0.667078] dwc2 101c0000.usb: new USB bus registered, assigned bus number 2 [ 0.667172] dwc2 101c0000.usb: irq 35, io mem 0x101c0000 [ 0.667730] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.667761] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.667783] usb usb2: Product: DWC OTG Controller [ 0.667805] usb usb2: Manufacturer: Linux 4.4.194 dwc2_hsotg [ 0.667824] usb usb2: SerialNumber: 101c0000.usb [ 0.669451] hub 2-0:1.0: USB hub found [ 0.669572] hub 2-0:1.0: 1 port detected [ 0.672543] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.672581] ehci-platform: EHCI generic platform driver [ 0.673024] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.673081] ohci-platform: OHCI generic platform driver [ 0.673646] usbcore: registered new interface driver usb-storage [ 0.673682] usb20_otg: version 3.10a 21-DEC-2012 [ 0.674191] usb20_host: version 3.10a 21-DEC-2012 [ 0.675861] usbcore: registered new interface driver iforce [ 0.676059] usbcore: registered new interface driver xpad [ 0.676091] i2c /dev entries driver [ 0.699721] rk3x-i2c 2005a000.i2c: Initialized RK3xxx I2C bus at d0844000 [ 0.702522] cpu cpu0: avs=0 [ 0.702735] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 600000 KHz [ 0.702903] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1200000 KHz [ 0.703188] Synopsys Designware Multimedia Card Interface Driver [ 0.703788] dwmmc_rockchip 10214000.dwmmc: supports-highspeed property is deprecated. [ 0.703869] dwmmc_rockchip 10214000.dwmmc: Using external DMA controller. [ 0.703899] dwmmc_rockchip 10214000.dwmmc: Version ID is 270a [ 0.703970] dwmmc_rockchip 10214000.dwmmc: DW MMC controller at irq 37,32 bit host data width,256 deep fifo [ 0.704017] dwmmc_rockchip 10214000.dwmmc: 'clock-freq-min-max' property was deprecated. [ 0.704153] dwmmc_rockchip 10214000.dwmmc: No vqmmc regulator found [ 0.704183] dwmmc_rockchip 10214000.dwmmc: GPIO lookup for consumer cd [ 0.704195] dwmmc_rockchip 10214000.dwmmc: using device tree for GPIO lookup [ 0.704221] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/dwmmc@10214000[0]' - status (0) [ 0.704270] gpio-49 (cd): gpiod_set_debounce: missing set() or set_debounce() operations [ 0.704284] dwmmc_rockchip 10214000.dwmmc: Got CD GPIO [ 0.704298] dwmmc_rockchip 10214000.dwmmc: GPIO lookup for consumer wp [ 0.704309] dwmmc_rockchip 10214000.dwmmc: using device tree for GPIO lookup [ 0.704323] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@10214000[0]' [ 0.704335] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@10214000[0]' [ 0.704345] dwmmc_rockchip 10214000.dwmmc: using lookup tables for GPIO lookup [ 0.704358] dwmmc_rockchip 10214000.dwmmc: lookup for GPIO wp failed [ 0.717250] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 0.729997] dwmmc_rockchip 10214000.dwmmc: 1 slots initialized [ 0.730359] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/led1-led[0]' - status (0) [ 0.730606] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/led2-led[0]' - status (0) [ 0.731475] sony_init [ 0.731701] usbcore: registered new interface driver usbhid [ 0.731712] usbhid: USB HID core driver [ 0.732862] rksfc_base v1.1 2016-01-08 [ 0.733213] rksfc 10208000.sfc: rksfc_probe clk rate = 99000000 [ 0.733276] rkflash_dev_init enter [ 0.733295] sfc_nand id: ef aa 22 [ 0.733333] SFTL version: 5.0.52 20191125 [ 0.783332] FtlGcRefreshBlock 0x14 [ 0.783346] FtlGcRefreshBlock 0x97 [ 0.806214] ...FtlVpcCheckAndModify enter... [ 0.837792] FtlCheckVpc 13 = 40 0 [ 0.837810] FtlCheckVpc 97 = 40 0 [ 0.838974] rkflash[2] init success [ 0.839509] rkflashd vendor storage init ok ! [ 0.893903] Alternate GPT is invalid, using primary GPT. [ 0.894004] rkflash0: p1 p2 p3 p4 p5 [ 0.895992] rkflash_dev_init device register as blk dev, ret= 0 [ 0.897176] usbcore: registered new interface driver snd-usb-audio [ 0.900341] Initializing XFRM netlink socket [ 0.900382] NET: Registered protocol family 17 [ 0.900437] NET: Registered protocol family 15 [ 0.900516] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 0.900539] 8021q: 802.1Q VLAN Support v1.8 [ 0.901245] ThumbEE CPU extension supported. [ 0.901285] Registering SWP/SWPB emulation handler [ 0.901856] flash vendor_init_thread! [ 0.901870] flash vendor storage:20170308 ret = -1 [ 0.902710] pvtm list NULL [ 0.903325] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound[0]' [ 0.903343] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound[0]' [ 0.904336] asoc-simple-card sound: i2s-hifi <-> 10220000.i2s mapping ok [ 0.906261] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/reset-key[0]' - status (0) [ 0.906696] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 0.907286] ---------lxm----add----evdev_connect,1401,dev_name(&evdev->dev)=(null),dev_no=0 [ 0.907286] [ 0.907308] ---------lxm----add----evdev_connect,1408,evdev->handle.name=event0,dev_no=0 [ 0.907308] [ 0.915957] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '17:35:23', on 'Dec 6 2023'. [ 0.916238] mali-utgard 10091000.gpu: mali_platform_device->num_resources = 9 [ 0.916255] mali-utgard 10091000.gpu: resource[0].start = 0x0x10091000 [ 0.916266] mali-utgard 10091000.gpu: resource[1].start = 0x0x10090000 [ 0.916276] mali-utgard 10091000.gpu: resource[2].start = 0x0x10093000 [ 0.916287] mali-utgard 10091000.gpu: resource[3].start = 0x0x10098000 [ 0.916297] mali-utgard 10091000.gpu: resource[4].start = 0x0x10094000 [ 0.916310] mali-utgard 10091000.gpu: resource[5].start = 0x0x00000019 [ 0.916320] mali-utgard 10091000.gpu: resource[6].start = 0x0x0000001a [ 0.916429] mali-utgard 10091000.gpu: resource[7].start = 0x0x0000001b [ 0.916441] mali-utgard 10091000.gpu: resource[8].start = 0x0x0000001a [ 0.916452] D : [File] : drivers/gpu/arm/mali400/mali/platform/rk/rk.c; [Line] : 623; [Func] : mali_platform_device_init(); to add platform_specific_data to platform_device_of_mali. [ 0.916566] mali-utgard 10091000.gpu: Failed to get leakage [ 0.916602] mali-utgard 10091000.gpu: Failed to get reg [ 0.916805] mali-utgard 10091000.gpu: avs=0 [ 0.919003] Mali: Mali device driver loaded [ 0.919157] ALSA device list: [ 0.919168] #0: rockchip,hdmi [ 0.919285] Warning: unable to open an initial console. [ 0.954977] VFS: Mounted root (squashfs filesystem) readonly on device 31:4. [ 0.973752] devtmpfs: mounted [ 0.979057] Freeing unused kernel memory: 1024K [ 1.017577] usb 1-1: new high-speed USB device number 2 using dwc2 [ 1.017783] devfreq 10091000.gpu: Couldn't update frequency transition information. [ 1.193437] mmc_host mmc0: Bus speed (slot 0) = 12000000Hz (slot req 37500000Hz, actual 12000000HZ div = 0) [ 1.193654] mmc0: new high speed SDHC card at address 59b4 [ 1.194587] mmcblk0: mmc0:59b4 29.1 GiB [ 1.197342] mmcblk0: p1 [ 1.228625] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 1.228644] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.228657] usb 1-1: Product: USB2.0 Hub [ 1.230044] hub 1-1:1.0: USB hub found [ 1.230513] hub 1-1:1.0: 4 ports detected [ 1.331894] udevd[74]: starting version 3.2.7 [ 1.334046] random: udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available) [ 1.334396] random: udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available) [ 1.334525] random: udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available) [ 1.334671] random: udevd: uninitialized urandom read (16 bytes read, 11 bits of entropy available) [ 1.368689] udevd[74]: specified group 'kvm' unknown [ 1.382667] udevd[75]: starting eudev-3.2.7 [ 1.443982] random: udevd: uninitialized urandom read (16 bytes read, 14 bits of entropy available) [ 1.506564] usb 1-1.3: new full-speed USB device number 3 using dwc2 [ 1.631616] usb 1-1.3: New USB device found, idVendor=20bc, idProduct=5500 [ 1.631637] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.631648] usb 1-1.3: Product: Twin USB Joystick [ 1.631657] usb 1-1.3: Manufacturer: ShanWan [ 1.654471] input: ShanWan Twin USB Joystick as /devices/platform/10180000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:20BC:5500.0001/input/input1 [ 1.706996] ---------lxm----add----evdev_connect,1401,dev_name(&evdev->dev)=(null),dev_no=1 [ 1.706996] [ 1.707022] ---------lxm----add----evdev_connect,1408,evdev->handle.name=event1,dev_no=1 [ 1.707022] [ 1.707441] betop 0003:20BC:5500.0001: input: USB HID v1.11 Gamepad [ShanWan Twin USB Joystick] on usb-10180000.usb-1.3/input0 [ 1.707786] betop 0003:20BC:5500.0001: Force feedback for betop devices by huangbo [ 1.734071] random: nonblocking pool is initialized [ 1.735832] input: ShanWan Twin USB Joystick as /devices/platform/10180000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:20BC:5500.0002/input/input2 [ 1.786998] ---------lxm----add----evdev_connect,1401,dev_name(&evdev->dev)=(null),dev_no=2 [ 1.786998] [ 1.787022] ---------lxm----add----evdev_connect,1408,evdev->handle.name=event2,dev_no=2 [ 1.787022] [ 1.787436] betop 0003:20BC:5500.0002: input: USB HID v1.11 Gamepad [ShanWan Twin USB Joystick] on usb-10180000.usb-1.3/input1 [ 1.787699] betop 0003:20BC:5500.0002: Force feedback for betop devices by huangbo [ 1.790282] usbhid 1-1.3:1.2: couldn't find an input interrupt endpoint [ 2.105923] FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 2.106916] [EXFAT] trying to mount... [ 2.212904] [EXFAT] mounted successfully [ 2.964406] EXT2-fs (rkflash0p5): warning: mounting unchecked fs, running e2fsck is recommended [ 3.040573] rockchip-vop 10118000.vop: [drm:vop_crtc_enable] Update mode to 1280x720p60, type: 11